IT / ENG / FR

IE1 Standard Efficiency Motors

The IE1 Series Standard Low Volt motors, are three-phase asynchronous motors with cast iron body.
The IE1Standard Low Volt motors are used mainly in oil industry, chemical, metallurgical, cement and paper, used in coupling pumps, fans, compressors and general machinery.
OME electric motors, are particularly performing and reliable thanks to the quality of materials that ensure long life even when operating at full capacity.


  

OPERATING CONDITIONS

All OME electric motors have the following features as standard:
- Ambient temperature: -15 ° C to + 40 ° C. On request you can reach 55 ° C.
- Altitude: 1,000 m above sea level standard, special request for altitude of 2000 m
- Rated voltage: 380V or any voltage between 220 V. - V.760.
- Rated frequency: 50 Hz, 60 Hz.
- Class of protection: IP54, IP55, on request IP65, IP66
- Insulation class: F. Upon request class H.
- Temperature rise: Class B
- Cooling method: IC 411
- Service: S1 (continuous).
- Connection: star connection up to 3kW, delta-connection from 4kW and above.


Note:
- Available terminal block at the top, right or left.
- The motors can also be equipped with PTC, as well as the lubrication system for the frame.
- On request SKF or NSK bearings.
- On demand heaters, klixon.

Gallery

Contact Information