IE1 Standard Electric Motors

The IE1 motors of the Standard low voltage series by OME Motors are three-phase asynchronous motors with an aluminum and / or cast iron body.
IE1 standard Low Volt motors are mainly used in the oil, chemical, metallurgical, cement and paper industries; they can be used in combination with pumps, fans, compressors and general machinery.
The OME electric motors are particularly performing and reliable thanks to the quality of the materials used which ensures a long life even during full operation.

Specifications
Category Electric motors, Standard motors
frame size mm H 56 - H 710
kw From 0.18kW - up to 2.000kW
voltage Multi voltages
poles 2-4-6-8-10-12-14-16
cooling system IC 411, IC 416, IC 611
hz 50 Hz - 60Hz
sectors Air Treatment, Cement, Food Industries, Power Plants, Steel Mill, Sugar Plant, Water System Purification, Water treatment and desalination, Wind Power Generation
fields applications Bending Rolls, Boylers, Compressors, Conveyors, Crusher – Shredders, Die Casting Machine, Fans and Blowers, Forging Presses, Heating and air conditioning HVAC, Injection Moduling Machine, Machine Tools, Pumps, Rolling Mill & Steel Plant Equipment, Sheet Metal Presses, Turbines

Motors IE1 Standard

  • High efficiency
  • Reliability
  • Long life
  • Easy Manutenction

Condizioni Operative:

All OME electric motors have the following standard features:

  • Ambient temperature: from -15 °C to + 40 °C. On request it is possible to reach 55 °C.
  • Altitude: standard altitude of 1,000m, on specific request altitude of 2000m.
  • Rated voltage: 380V – 400V or any voltage between V.220 – V.1000.
  • Rated frequency: 50 HZ, 60 HZ.
  • Protection class: IP55, on request IP56, IP65, IP66.
  • Insulation class: F. On request class H.
  • Temperature increase: Class B.
  • Cooling method: IC 411 or IC416 on request.
  • Service: S1 (continuous).

Note:

  • All OME aluminum motors have removable feet.
  • From frame size 160, the motors are made of cast iron with terminal box on top. On request the OME can produce them with the terminal box on the right side or left side.
  • SKF bearing series.
  • On request heaters and Klixon.
2