IE3 Premium Motors

IE3 Premium Motors
OME IE3 motors have compact dimensions and guarantee high energy savings, thus contributing to respect for the environment. Thanks to their modular construction, they are highly flexible electric motors: each of them is based on a homogeneous concept valid for all world markets.
The IE3 models are "Process Performance Premium Efficiency" motors, developed by OME Motors to achieve the highest reliability requirements. The whole range of "Process Performance" motors is able to offer high IE3 basic efficiency values, high level operational performance and low starting currents.
IE3 Premium Motors
Fast and easy connection
Low bearings
temperatures
Top cooling system
Cast iron or alluminium body
Lightweight design
IE3 Premium Motors
Low bearings temperatures
Lightweight design
Top cooling system
Cast iron or alluminium body
Fast and easy connection

Motors IE3 Premium

  • High efficiency
  • Reliability
  • Long life
  • Easy Manutenction

Specifications

Category Categoria 13
Frame size (mm) H 56 - H 710
Kw From 0,18kW - up to 2.000kW
Voltage Multi voltages
Poles 2-4-6-8-10-12-14-16
Cooling System IC 411, IC 416, IC 611
Hz 50 Hz - 60Hz
Sectors Air Treatment, Cement, Food Industries, Power Plants, Steel Mill, Sugar Plant, Water System Purification, water treatment and desalination, Wind Power Generation
Fields Applications Bending Rolls, Boylers, Compressors, Conveyors, Crusher – Shredders, Die Casting Machine, Fans and Blowers, Forging Presses, Heating and air conditioning HVAC, Injection Moduling Machine, Machine Tools, Pumps, Rolling Mill & Steel Plant Equipment, Sheet Metal Presses, Turbines

Operating Conditions:

All OME electric motors have the following standard features:

  • Double tropicalization carried out under vacuum.
  • Insulation class F.
  • Degree of protection IP 55.
  • Size range between 56 and 450.
  • Made of die-cast aluminum from size 56 to size 132, in cast iron over 132.
  • Upon request, aluminum motors with sizes 160 and 180 can be made.
  • Temperature range between -15 °C and + 40 °C.
  • PTC thermal probes at 150 ° C on the three phases from size 56 to 132 and PTC and KLIXON from size 160 to 450.
  • SKR 2RS bearings up to size 225.
  • Greasers with open SKF bearings from size 250 to 450.
  • Roller bearing of size 250 excluding the 2-pole (mounted at the front).
  • Both front and rear bearings mechanically locked on the shaft.
  • Terminal blocks located on the top of the motor with IP 55 insulation.
  • Epoxy painting, carried out with the oven drying process, with standard RAL 7030 gray color compliant with the RoHS regulation.
  • -Multitension and multifrequency Volt 230 / 400-280 / 480 and Volt 400 / 690-480 / 830 Hz 50/60.
  • Continuous duty operation S1.
  • Suitable for use at an altitude not exceeding 1000 meters above sea level.
  • Individually tested with empty test and under load.